Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4000-20 2600 4000kv 10kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4000-20 2600 4000kv 10kv IP20

I. Overview
The huge 3-period synchronous motor for TK sequence air compressor is a substantial-functionality sequence merchandise specifically developed and produced by our business for the load of air compressor.
This series of motors adopts new technologies, new materials, new processes, exquisite material variety, and refined producing. It has the qualities of tiny dimensions, mild fat, gorgeous look, large effectiveness, minimal noise, minimal vibration, protected and reliable procedure, and practical use and servicing.

2. Implementation requirements
GB755 Rotating Motor Ranking and Performance
Classification of GB/T997 rotary motor framework sort, set up type and junction box position (IM code)
GB/T1571 3-phase synchronous motor check technique
GB/T1993 Rotating Device Cooling Method
GB/T4942.one Security course (IP) classification of the general construction of rotating electrical devices
GB/T10068 The measurement, analysis and restrict of mechanical vibration with a shaft center height of 56mm and previously mentioned
GB/T10069 Rotating Machine Sounds Measurement Technique and Restrict
JB/T8667.one CZPT Circumstances of Large Three-period Synchronous Motor Element one: TK Collection
3. Fundamental complex parameters
Electrical power range: 250~10000KW
Rated voltage: 6000, 10000V
Rated velocity: 250, 273, 300, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Defense amount: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling technique: IC01, IC37, IC81W
Set up technique: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters according to user demands
4, technological qualities
four.one The structural design and style is realistic, risk-free and dependable, and the capability to phase out of stage is robust.
four.2 The primary insulation composition using new insulating resources has large voltage resistance and long motor daily life.
four.3 The temperature increase margin is massive. The motor adopts F-course insulation, and the temperature increase is assessed according to the temperature rise restrict of the B pole insulation.
4.4 The protection device is sophisticated and full.
4.one.1 The stator windings and bearings are outfitted with temperature detection products, which can detect, alarm and journey.
four.4.two Shutdown room heater with anti-condensation effect.
four.five Big inertia. Motors with distinct moments of inertia can be created according to user demands.
5, structure variety
5.1 The all round composition of this sequence of motors is welded with steel plates for the frame, conclude cover, and base plate. The motor is an impartial cavity, and the slip ring can be made with diverse safety levels in accordance to consumer requirements.
five.2 Stator: The stator body is welded by steel plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet position can be led out from the lower component of the foundation or from the major junction box on the side of the motor.
The stator main is superimposed by low-reduction silicon steel sheets, and the main sections are separated by radial ventilation ducts.
The stator winding is F grade insulation, and the temperature rise is assessed according to B grade to aid extend the service lifestyle. It adopts VPI general dipping paint therapy, which has higher electrical performance, mechanical energy, insulation functionality, moisture resistance and thermal security.
five.3 The rotor magnetic pole main is produced of laminated steel plates, and has various buildings this sort of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is equipped with a admirer, which can properly handle the temperature rise of the rotor.
5.four Undertake seat kind spherical sliding bearing. The bearings are insulated to avoid shaft currents.
Use new lubricating oil and skinny-walled bearing alloy tiles, and set electromagnetic centerline indicators.
5.five According to consumer needs, the slip ring can be developed as a constructive pressure air flow composition to increase the safety of the motor. The total length of the motor with the constructive stress air flow construction of the slip ring is somewhat elevated.
6. Problems of Use
6.one Voltage fluctuation: ±5% (It can run below ±10% under the conditions of 7.3 in GB755)
6.2 Frequency fluctuation: ±2%
6.three The altitude does not exceed 1000m
six.4 The greatest ambient temperature does not exceed +40ºC, and the bare minimum is 0ºC.
Seven, model description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Number of poles (sixteen poles)

Rated electrical power (1250KW)
3-section synchronous motor for compressor
eight. Buying instructions
eight.1 Before putting an get, make sure you refer to the merchandise catalog of this collection to explain the essential solution model, specs and other information. If there is a discrepancy between the specifications and the samples, you should speak to our organization.
8.two The motor model, rated power, synchronous pace, rated voltage, rated frequency, safety degree, minute of inertia, rotation route, installation sort, etc. have to be indicated when buying.
eight.3 The sample technical data sheet only lists the pertinent info of motors with rated voltages of 6KV and 10KV. If users want other voltage amounts, our organization can also provide relevant technical knowledge when purchasing.
8.4 The technical knowledge and dimensions in the sample are only for reference when the consumer selects the model. The official info will be offered by the organization after the contract or complex agreement is signed.
eight.five If there are any other special demands, please give the specifications and signal the pertinent complex settlement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4000-20 2600 4000kv 10kv IP20