motor armature

Item Description

 

Solution Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Application:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc.

Product Parameters

Planetary Equipment Box Specification:

Housing Materials Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Enjoy of Shaft (near to Flange) ≤0.08mm
Axial Perform of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

20HS Hybrid Stepping Motor Requirements:

Model No. Step Angle Motor Size(L1) Rated Present Resistance Inductance Holding Torque # of Qualified prospects Rotor Inertia Mass Max.Equipment Ratio
Voltage /Period /Stage /Stage
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 one.8 thirty three.twenty five .five six.5 one.5 fifteen 4 two .06 ≤1:369
20HS6401 one.eight forty one 4.4 .eight five.5 one.5 thirty 4 three .1 ≤1:369

20HS1450 Planetary Gearbox Motor Requirements:

Reduction ratio 3.seventy one five.18 fourteen 19 27 51 71 100 139 189 264 369
Complete Top(L1+L2) (mm) fifty three.four fifty three.four 60 60 sixty 66.four sixty six.four sixty six.4 sixty six.4 72.8 72.eight 72.8
Output torque ( mN.m) 50 70 170 231 328 558 777 1095 1522 1871 2000 2000
Total Weight(g) 91 91 97 97 ninety seven 103 103 103 103 109 109 109
Variety of equipment trains 1 2 3 4
Reducer Size(L2)   (mm) 23.4 30. 36.4 42.8
Efficiency 90% 81% 73% 66%

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 fourteen 19 27 fifty one 71 one hundred 139 189 264 369
Total Top(L1+L2) (mm) 64.four 64.4 71 seventy one seventy one seventy seven.four seventy seven.4 seventy seven.4 77.four eighty three.eight eighty three.8 83.eight
Output torque ( mN.m) 100 one hundred forty 340 462 656 1117 1555 2000 2000 2000 2000 2000
Overall Bodyweight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Variety of equipment trains 1 2 3 4
Reducer Size(L2)   (mm) 23.4 30 36.4 42.eight
Performance 90% 81% 73% 66%

 

Comprehensive Images

 

 

 

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Variable Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%
Application: Automation Control, Medical Equipment, Textile Mac
Speed: Variable Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

 motor armature motor armature
editor by czh 2023-03-23

Recent Posts