China high quality CHINAMFG High Quality 0.37kw Electric Crane Geared Motor (BM-050) a/c vacuum pump

Product Description

CHINAMFG High Quality 0.37kw Electric Crane Geared Motor (BM-050)

 

CHINAMFG specialize in manufacturing BMS electric chain hoist, BMG wire rope hoist, BM electric chain hoist, Crane geared motor, End carriage ,Manual chain hoist

CHINAMFG brand products include:
* BMS electric chain hoist from 125kg to 1ton
* BMG wire rope hoist from 3.2ton to 80 ton
* BM electric chain hoist from 250 kg to 50ton
* Crane geared motor
* End carriage
* Manual chain hoist

CHINAMFG Crane geared motor with Buffer :

1. Speed reducer shell adopts good material
Cast Iron manufacturing,with high precision CNC lathe machining,gear made of alloy steel material,vacuum carburizing pumping after careful calibration and abrasive,impact resistance,high safety factor of 5 times or more.

2. Buffer
The use of the flywheel cushion motor producted out of shape,high inertia,start and brake are very smooth,not heavy shaking.

3. Motor
Easy tp heat,high pressure,low noise,high performance,high torque,small current,small volume,strong output power,high frequency can be used.

4. Electromagnet brake
Brake force,bolt directly adjust the braking force,brake pads with high wear resistance,long service life,high safety.

Model Power Poles Output Module Gear Ratio Speed
50hz 60hz
BM-030 0.25KW 4P M3,M3.5,M4 10:1 150rpm 180rpm
0.25KW 6P 90rpm 120rpm
0.4KW 4P 150rpm 180rpm
BM-050 0.4KW 4P M3,M3.5,M4 8.5:1 176rpm 210rpm
0.37KW 6P 115rpm 140rpm
BM-050(QX) 0.75KW 4P 176rpm 210rpm
0.6KW 6P 115rpm 140rpm
BM-100 0.75KW 4P M3,M3.5,M4,M5 7.7:1 188rpm 228rpm
0.6KW 6P 123rpm 148rpm
0.4/0.13KW4P 4P 188/62rpm 228/75rpm
BM-100(QX) 1.1KW 4P 188rpm 228rpm
0.75KW 6P 123rpm 148rpm
BM-150 1.1KW 4P M3.5,M4,M5 13:1 114rpm 135rpm
0.75KW 6P 67rpm 92rpm
0.6/0.2KW 4/12P 114/33rpm 137/45rpm
BM-150(QX) 1.5KW 4P 114rpm 135rpm
1.1KW 6P 67rpm 92rpm
BM-200 1.5KW 4P M4,M5,M6 16:1 92rpm 110rpm
1.1KW 4P 92rpm 110rpm
1.5KW 6P 61rpm 7.3rpm
0.75/0.25KW 4/12P 92/30rpm 110/36rpm
BM-200(QX) 2.2KW 4P 92rpm 110rpm
1.5KW 6P 61rpm 73rpm
BM-300 2.2KW 4P M5,M6 16:1 92rpm 110rpm
1.5KW 6P 61rpm 73rpm
1.5/0.5KW 4/12P 92/30rpm 110/73rpm

FAQ:
 
1.What’s your product range?
We are specialized in manufacturing electric chain hoist,european wire rope hoist,manual electric chain hoist,crane geared motor end carriage and etc.

2.When can I get the quotation?
There have mailbox and other contact ways in website,you can feel free to contace us.If we received your enquiry,we will contact you and ask you something important about the products that you really need,and then we will send you the quotation.

3.What information should I know if I want to get a quotation?
It is very important for customers to know the specifications that you want to purchase.So you should know the lifting height,model,pendant button and etc.So,we can send you the quotation.More details can be provided if you contact us.

4.Why you choose BRIMA?
Prompt reply for inquiry within 24hours;
High capacity and professional technology;
Strict delivery inspection guarantees;
After-sales service for you.

We will do our best to satisfy your needs.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Species: YS Series Three-Phase
Rotor Structure: Squirrel-Cage
Casing Protection: Protection Type
Customization:
Available

|

gear motor

What are the maintenance requirements for gear motors, and how can longevity be maximized?

Gear motors, like any mechanical system, require regular maintenance to ensure optimal performance and longevity. Proper maintenance practices help prevent failures, minimize downtime, and extend the lifespan of gear motors. Here are some maintenance requirements for gear motors and ways to maximize their longevity:

1. Lubrication:

Regular lubrication is essential for gear motors to reduce friction, wear, and heat generation. The gears, bearings, and other moving parts should be properly lubricated according to the manufacturer’s recommendations. Lubricants should be selected based on the motor’s specifications and operating conditions. Regular inspection and replenishment of lubricants, as well as periodic oil or grease changes, should be performed to maintain optimal lubrication levels and ensure long-lasting performance.

2. Inspection and Cleaning:

Regular inspection and cleaning of gear motors are crucial for identifying any signs of wear, damage, or contamination. Inspecting the gears, bearings, shafts, and connections can help detect any abnormalities or misalignments. Cleaning the motor’s exterior and ventilation channels to remove dust, debris, or moisture buildup is also important in preventing malfunctions and maintaining proper cooling. Any loose or damaged components should be repaired or replaced promptly.

3. Temperature and Environmental Considerations:

Monitoring and controlling the temperature and environmental conditions surrounding gear motors can significantly impact their longevity. Excessive heat can degrade lubricants, damage insulation, and lead to premature component failure. Ensuring proper ventilation, heat dissipation, and avoiding overloading the motor can help manage temperature effectively. Similarly, protecting gear motors from moisture, dust, chemicals, and other environmental contaminants is vital to prevent corrosion and damage.

4. Load Monitoring and Optimization:

Monitoring and optimizing the load placed on gear motors can contribute to their longevity. Operating gear motors within their specified load and speed ranges helps prevent excessive stress, overheating, and premature wear. Avoiding sudden and frequent acceleration or deceleration, as well as preventing overloading or continuous operation near the motor’s maximum capacity, can extend its lifespan.

5. Alignment and Vibration Analysis:

Proper alignment of gear motor components, such as gears, couplings, and shafts, is crucial for smooth and efficient operation. Misalignment can lead to increased friction, noise, and premature wear. Regularly checking and adjusting alignment, as well as performing vibration analysis, can help identify any misalignment or excessive vibration that may indicate underlying issues. Addressing alignment and vibration problems promptly can prevent further damage and maximize the motor’s longevity.

6. Preventive Maintenance and Regular Inspections:

Implementing a preventive maintenance program is essential for gear motors. This includes establishing a schedule for routine inspections, lubrication, and cleaning, as well as conducting periodic performance tests and measurements. Following the manufacturer’s guidelines and recommendations for maintenance tasks, such as belt tension checks, bearing replacements, or gear inspections, can help identify and address potential issues before they escalate into major failures.

By adhering to these maintenance requirements and best practices, the longevity of gear motors can be maximized. Regular maintenance, proper lubrication, load optimization, temperature control, and timely repairs or replacements of worn components contribute to the reliable operation and extended lifespan of gear motors.

gear motor

What is the significance of gear reduction in gear motors, and how does it affect efficiency?

Gear reduction plays a significant role in gear motors as it enables the motor to deliver higher torque while reducing the output speed. This feature has several important implications for gear motors, including enhanced power transmission, improved control, and potential trade-offs in terms of efficiency. Here’s a detailed explanation of the significance of gear reduction in gear motors and its effect on efficiency:

Significance of Gear Reduction:

1. Increased Torque: Gear reduction allows gear motors to generate higher torque output compared to a motor without gears. By reducing the rotational speed at the output shaft, gear reduction increases the mechanical advantage of the system. This increased torque is beneficial in applications that require high torque to overcome resistance, such as lifting heavy loads or driving machinery with high inertia.

2. Improved Control: Gear reduction enhances the control and precision of gear motors. By reducing the speed, gear reduction allows for finer control over the motor’s rotational movement. This is particularly important in applications that require precise positioning or accurate speed control. The gear reduction mechanism enables gear motors to achieve smoother and more controlled movements, reducing the risk of overshooting or undershooting the desired position.

3. Load Matching: Gear reduction helps match the motor’s power characteristics to the load requirements. Different applications have varying torque and speed requirements. Gear reduction allows the gear motor to achieve a better match between the motor’s power output and the specific requirements of the load. It enables the motor to operate closer to its peak efficiency by optimizing the torque-speed trade-off.

Effect on Efficiency:

While gear reduction offers several advantages, it can also affect the efficiency of gear motors. Here’s how gear reduction impacts efficiency:

1. Mechanical Efficiency: The gear reduction process introduces mechanical components such as gears, bearings, and lubrication systems. These components introduce additional friction and mechanical losses into the system. As a result, some energy is lost in the form of heat during the gear reduction process. The efficiency of the gear motor is influenced by the quality of the gears, the lubrication used, and the overall design of the gear system. Well-designed and properly maintained gear systems can minimize these losses and optimize mechanical efficiency.

2. System Efficiency: Gear reduction affects the overall system efficiency by impacting the motor’s electrical efficiency. In gear motors, the motor typically operates at higher speeds and lower torques compared to a direct-drive motor. The overall system efficiency takes into account both the electrical efficiency of the motor and the mechanical efficiency of the gear system. While gear reduction can increase the torque output, it also introduces additional losses due to increased mechanical complexity. Therefore, the overall system efficiency may be lower compared to a direct-drive motor for certain applications.

It’s important to note that the efficiency of gear motors is influenced by various factors beyond gear reduction, such as motor design, control systems, and operating conditions. The selection of high-quality gears, proper lubrication, and regular maintenance can help minimize losses and improve efficiency. Additionally, advancements in gear technology, such as the use of precision gears and improved lubricants, can contribute to higher overall efficiency in gear motors.

In summary, gear reduction is significant in gear motors as it provides increased torque, improved control, and better load matching. However, gear reduction can introduce mechanical losses and affect the overall efficiency of the system. Proper design, maintenance, and consideration of application requirements are essential to optimize the balance between torque, speed, and efficiency in gear motors.

gear motor

How does the gearing mechanism in a gear motor contribute to torque and speed control?

The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:

The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.

Torque Control:

The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.

By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.

Speed Control:

The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.

By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.

In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.

China high quality CHINAMFG High Quality 0.37kw Electric Crane Geared Motor (BM-050)   a/c vacuum pump		China high quality CHINAMFG High Quality 0.37kw Electric Crane Geared Motor (BM-050)   a/c vacuum pump
editor by CX 2024-04-15

Recent Posts